Gechic On-lap 1302 For Mac

1023

GeChic On-Lap 1503H – Design and Features There’s plenty to like about the On-Lap 1503H, but styling isn’t at the top of the list. It has a large black plastic bezel and curved edges.

  1. Rotate the On-Lap Monitor clockwise so that it is parallel to the laptop, open the laptop monitor and the On-Lap Monitor at the same me, as illustrated. Adjust the angle of the On-Lap Monitor.
  2. On-Lap 1301 was shown on MacFormat UK. GeChic On-Lap Monitor was exposed on UK Magazine-MacFormat. Quoted from MacFormat Christmas 2011 / P.19 GeChic’s On-Lap Monitor brings dual-screen convenience to your MacBook.

When it comes to my computer setup, I prefer having at least two displays on my desk. It’s a lot easier to work when you have all that screen real estate. In my setup, I have a laptop and an external display; but when I have to unplug my laptop and work remotely, the single display feels cramped, even on a 17-inch MacBook Pro. It helps to use and create multiple desktops, but it feels so inefficient to shuffle between desktops all the time. Last December, released the, a 13.3-inch portable external display for laptops. Weighing only 23 ounces, the On-Lap 1302 is light enough and small enough to stash in your bag with your laptop.

Though the On-Lap 1302 display itself is rather ho-hum, you can have a two display setup wherever you go, even if you’re working out of your local library or coffee shop. HDMI and the Retina MacBook Pro We’ve had the GeChic 1302 for a while, but since it requires an HDMI connection, reviewing it wasn’t a priority—MacBooks in the past few years have used either a Mini DisplayPort connector or a mini DVI connector. You need to buy and use an HDMI adapter. But Apple released the ( ). In addition to the two Thunderbolt ports that can be used with Thunderbolt or Mini DisplayPort displays, the Retina MacBook Pro is the first Apple laptop to sport an HDMI port. No adapter is needed to use the On-Lap 1302. A major issue with the 15-inch Retina MacBook Pro is the screen real estate.

Apple discontinued the, with the idea that the Retina MacBook Pro acts as its replacement. While you can set the Retina MacBook Pro to a resolution that, according to OS X’s Displays preferences, “Looks like 1920 by 1200,” everything on the screen is smaller—for some, that’s an unacceptable alternative to the 17-inch MacBook Pro’s native 1920 by 1200 resolution. If you prefer not to use the Retina MacBook Pro’s More Space (Looks like 1920 by 1200) setting, using the On-Lap 1302 with a Retina MacBook Pro can help add additional screen real estate, but it’s still a compromise.

The On-Lap 1302’s image quality isn’t up to par with the MacBook Pro’s built-in display, even when the built-in display is not using the Retina setting, and you’ll have to do some window management to figure out how to best use the On-Lap 1302. But it’ll definitely help relieve that cramped feeling. The display The On-Lap 1302 has a 13.3-inch (diagonal) display with dimensions of 13.15 by 8.94 by 0.31 inches. The display comes with a combo cable that has a connector for the display on one end and separate USB and HDMI connectors on the other end, which you plug into your Mac. The USB connector provides power to the On-Lap 1302.

To get your display up and running, all you have to do is make all the cable connections and turn on the On-Lap 1302. On my Retina MacBook Pro, the On-Lap 1302 was instantly recognized, though I had to do some rearranging in the Displays system preferences. The screen itself, with a native resolution of 1366 by 768, is an acceptable secondary screen. I like to use a large display where I do most of my work, and a second, smaller display as my “communications console,” where I have Mail, iChat, Twitter, and a chat room open at all times.

The On-Lap 1302 works well as my console when I’m using the Retina MacBook Pro’s display as the main screen. The On-Lap 1302’s image quality, however, pales in comparison to the Retina MacBook Pro’s display—or any MacBook display, for that matter. The color quality is fine, but flat.

Mac

There’s some minor banding on color gradients, and the detail is acceptable for general use, but it’s not as sharp and crisp as the regular MacBook Pro display. If you’re performing color-critical work or image editing, you may not want to rely on the On-Lap 1302.

The biggest problem with the On-Lap 1302 is the viewing angle. It’s fine when the On-Lap 1302 is directly in front of you; it’s still fine if it’s off to the side next to your primary display—but you’ll be sitting at the outer range of the On-Lap 1302’s viewing angle. If you move to a sharper angle, the degradation in image quality is very noticeable. Compared to the Retina MacBook Pro, which has the advantage of having an IPS display, the viewing angle of the On-Lap 1302 is quite narrow. Another problem is that the On-Lap 1302’s front is susceptible to glare, even more so than the regular, non-Retina MacBook Pro.

When you combine the glare with the small viewing angle, you end up being more conscious of where you sit in regards to light sources. Mac pos software. The stand and the mount GeChic includes a set of ugly, green Stand Bricks that act as a stand for the On-Lap 1302. The Stand Bricks have notches that fit on the side of the display, but they make for a horrible stand.

The display ends up at an awkward angle; it faces too much towards the ceiling, and often, the display would collapse. GeChic offers the Stand Bricks 2 (still green, still ugly) as an optional accessory, which has more pieces and can be put together to create a much more effective stand. You can also use the Stand Bricks 2 as a stand for your iPhone or iPad when it’s not holding the display. The On-Lap 1302’s laptop mount is an interesting accessory that creates a two-headed laptop. You mount the On-Lap 1302 on your laptop’s display, using a hinge on the left side of the On-Lap 1302. The hinge latches on to a Holder Plate that you stick—yes, I said stick—on the back of the laptop’s display with double-sided tape that GeChic provides.

(Since the hinge is on the left of the On-Lap 1302, it’s meant to be mounted on the right side of your laptop—most people will probably want to mount it there. If you want to mount it on the left side of the laptop, you have to turn the On-Lap 1302 so that the display is upside-down, and you’ll have to rotate the on-screen display 180 degrees using the Displays system preferences.) The assembly isn’t difficult, once you get over the idea of sticking a piece of metal to the back of a laptop. Over a month’s time, the tape didn’t seem to weaken, but I do wonder when the tape will eventually give way.

The On-Lap 1302 looks like a PC display, and it doesn’t match the design of the MacBook Pro. It has a white bezel, and the back of the On-Lap 1302 is gray and looks like the lid of a PC laptop. The design aesthetics don’t bother me when I’m using the laptop with the display, but when you fold and close everything up, the On-Lap 1302 is still exposed, leaving it susceptible to scratches. You can slide the display off the Holder Plate, which is what you should do when you’re not using the On-Lap 1302, but then you have a Holder Plate stuck on your laptop, and the Plate often got snagged in my backpack. Overall, I preferred using the Stand Bricks 2 to the included Stand Bricks and the Holder Plate mount. It’s another item to carry around, but it offers more flexibility and it feels more secure. The Quick Installation Guide also warns of the laptop toppling if the On-Lap 1302 is mounted, and even though I never had that happen, it’s another reason to go with the stand.

Macworld’s buying advice A second screen with your laptop is great for doing production work. The On-Lap 1302 can be helpful for when you need more desktop space at a remote location, though you don’t want to rely on it when color accuracy and extreme detail are part of your tasks. There are issues with the viewing angle and glare, which means you’ll need to be picky about where you set yourself up. But overall, the On-Lap 1302 is a useful, portable device. Roman Loyola is a Macworld senior editor.

'Two screens good, one screen bad', as Eric Blair might have written: but how do you get two screens on a notebook? Normally you'd have to attach a desktop monitor, which obviously limits your flexibility, or shell out serious money on a specialist system like the recently released dual-17in., which starts at princely $1,899 (£1,216). Significantly less 'sticker shock' is attached to an intriguing device from Taiwanese company GeChic, called the. Available for £120.83 from, this is a bolt-on (or, more accurately, stick-on) 13.3in. Screen that you can also use standalone in either landscape or portrait mode. Add a second screen to your notebook for £121 — probably not for use on train or 'plane though The On-Lap itself is a 13.3in. TFT screen with a native resolution of 1,366 by 768 pixels, set in a hinged frame with a grip on one short edge and a compartment, sealed by a slide-off cover, at the bottom containing connections and cables.

There is a hard-wired USB cable that provides power, and a choice of two plug-in signal cables: analogue (mini-VGA to 15-pin D-Sub) and digital (mini-DVI to HDMI). The On-Lap frame attaches to the back of the notebook with suckers; the power and signal connections live under a slide-off cover To attach the On-Lap to a notebook, you get four suckers, or 'cupules' as GeChic calls them, that screw into the frame and grip onto the back of the clamshell's screen. If this is an irregular or otherwise unsuitable surface, sticky Mylar pads are supplied to provide the suckers/cupules with sufficient traction. The On-Lap in 'presentation mode' After attaching the USB and signal cables (we used a digital connection on our test Windows 7 system), and tidying up the cables under the sliding cover, you're good to go. The screen can fold flat on the back, facing outwards in 'presentation mode', but will more often be employed as an extension of your workspace, folded out at somewhere between 180 and 225 degrees. Five icons for power-on/off and OSD operation on the right-hand side of the (landscape-mode) On-Lap screen look like touch-sensitive controls, but in fact signify the location of physical buttons on the reverse side. On our testbed notebook, the HDMI signal connector obscured one of the notebook's two USB ports — and the other one was required for power to the second screen; a VGA connection is also available though It's worth giving careful consideration to the notebook to which you attach the On-Lap, on a couple of counts.

First, you'll need a system with a sturdy screen hinge so that the added weight of the 865g second screen doesn't cause too much instability when both displays are set a comfortable viewing angle. Second, check the layout of your connectors: on our test system (from MSI), the two USB ports and the HDMI port were in a row on the left-hand side, and the HDMI connector's side-mounted cable obscured one of the USB ports, leaving just one available for the power input (and none left for any regular notebook functions). If a free USB port was essential, we could have used the analogue VGA cable to the connector on the right-hand side of the notebook, at the expense of an even more untidy cable arrangement. We found the On-Lap more compelling than we thought we would, although clearly it has its drawbacks. It renders your notebook considerably less portable by adding 865g of weight and imposing an extra power drain on your battery. Even if you can cope with that, you'd need considerable brass neck to open the second screen out on a train or airplane.

Gechic On Lap 1503i

Also, with the screen folded away and facing outwards, you'll need a decent slip case and travel bag to keep everything safe in transit. Having said all that, if you need to transport a notebook from room to room at home, or from office to office at work, and you want to be guaranteed an instant, reasonably flexible, dual-screen workspace, it's really rather good for the price. Related Topics. By registering you become a member of the CBS Interactive family of sites and you have read and agree to the,.

You agree to receive updates, alerts and promotions from CBS and that CBS may share information about you with our marketing partners so that they may contact you by email or otherwise about their products or services. You will also receive a complimentary subscription to the ZDNet's Tech Update Today and ZDNet Announcement newsletters. You may unsubscribe from these newsletters at any time. ACCEPT & CLOSE.

This entry was posted on 23.10.2019.