. 1851 Answers SOURCE: In most of the cases like yours the problem is at the buttons at the lower of the screen. In case one of these buttons is pushed and locked in, all the buttons are blocked.
First of all check that the buttons are mechanical working; push them one by one in order to feel the click of the button. In case of one (or more) are not clicking they have problem and has to be replaced. There is the possibility that the click is active although the button is defective; this is because the inner contact of the button is dirty or damaged. In this case you have to open the monitor's case (usually you have to remove the screws at the back of the monitor and open the cover slowly in order the clips all around the frame to get unlocked), spray with a contact cleaner direct at the buttons and push each one several times to get cleaned. By the way that the cover is open check the cables connecting the buttons board with the rest for possible cut or loose contact. VERY carefully plug the monitor and check the results.
In case that the problem is still active one of the buttons is defective and needs replacement using soldering tools. In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer. If you are satisfied, accept my solution. Thanks and regards Stelios direct fixya link: Posted on Nov 12, 2010.
Download the latest ASUS MW MW221U device drivers (Official and Certified). ASUS MW MW221U drivers updated daily. Download Now.
Press and hold the 'Fn,' or function, key on your EEE PC-1000's keyboard. Press 'F3' while holding 'Fn' to lower the brightness on your monitor. The brightness on your computer decreases each time 'F3' is pressed. Press 'F4' while holding 'Fn' to increase the brightness on your monitor. Each time 'F4' is pressed, the brightness increases. Press 'F8' while holding 'Fn' to decrease the volume from your EEE PC's speakers.
Each time 'F8' is pressed, the volume decreases. Press 'F9' while holding 'Fn' to increase the volume from your EEE PC's speakers.
Each time 'F9' is pressed, the volume increases. Press the 'Ins' key while holding 'Fn' to take a screen shot, or make a copy of what is currently on the computer screen. Hope this helps Oct 08, 2012. Laptop ot desktop monitor? Adjust your monitor's brightness and contrast You can adjust the brightness and contrast of your monitor to improve the readability of text and to make digital pictures appear more like they'll look when printed. To improve the results when adjusting the brightness and contrast settings for your display, use Display Color Calibration.
(Display Color Calibration helps you adjust these color settings and others.) The way you adjust brightness and contrast varies and depends on your specific display. Brightness and contrast buttons on the front of the monitor. Some monitors have brightness and contrast controls on the front and use the standard symbols shown in the following image. Brightness and contrast symbols On-screen menu.
You can change the brightness and contrast settings for some displays by using an on-screen menu, and then setting the brightness and contrast in the resulting menu. Many times, you can view the on-screen menu by pressing a button-possibly labeled Menu-on the front of the monitor. Laptop display. Laptop displays don't have brightness or contrast buttons on the front. For a majority of laptops, there isn't a control for setting the contrast. However, you can set the brightness of many laptops by pressing and holding the Fn key, and then pressing a function key to decrease brightness ( ) or increase brightness ( ).
# When using Display Color Calibration on a laptop, set the display to the maximum brightness setting. Adaptive brightness is a feature in Windows that uses a light sensor to automatically adjust the display brightness to match the lighting conditions in your computer's surroundings. To use adaptive brightness, you must have light sensors installed and enabled on your computer. To determine if your laptop or computer monitor supports adaptive brightness, look for the Enable adaptive brightness setting in Power Options (mentioned in the following procedure) or check the information that came with your computer. To turn adaptive brightness on or off Open Power Options by clicking the Start button, clicking Control Panel, clicking System and Security, and then clicking Power Options.
Under any plan, click Change plan settings. Click Change advanced power settings. In the list, expand Display, and then expand Enable adaptive brightness.
To turn adaptive brightness on or off when your computer is running on battery power, click On battery, and then, in the list, click On or Off. To turn adaptive brightness on or off when your computer is plugged into an outlet, click Plugged in, and then, in the list, click On or Off.
Hope this helps Jul 26, 2012. Hi You do not say if your laptop screen is working or not or why you want to use an external monitor. Assuming the laptop has no fault and boots properly, to send the laptop image to an external monitor, once you have booted into Windows, press and hold the Fn (function) key bottom left of your keyboard, near the Windows Logo key, then simultaneouly press the Function key (above the numbers) with the image of 2 monitors, 1 dark, 1 bright (often the F4, F5 or F6 key).
If the laptop's screen is faulty and the above procedure does not work, there may be damage to the graphics card which will probably require specialist repair. I hope this helps.
Aug 27, 2011.
Asus Mw221u Driver For Macbook Pro
The following is the important information of Asus MW221U installation driver. Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear. Select a directory to save the driver in and click Save. Locate the driver file using Windows Explorer when the download has completed.
Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the MW221U model that was downloaded (for example c: MW221U). The setup program will also automatically begin running after extraction.
However, automatically running setup can be unchecked at the time of extracting the driver file. Look for a file xxx.INF (for example MW221U.inf). 1. Click 'START' » 'CONTROL PANEL'.
2. Now, click on 'DISPLAY' icon, then 'SETTINGS' » 'ADVANCED' » 'MONITOR' » 'PROPERTIES' » 'DRIVER' » 'DRIVER UPDATE'. Choose 'Install from a list or specific location ( advanced )', than click 'NEXT' button.
Choose the 'Don't Search. I will choose the driver to install' button and click 'NEXT'. Click the 'HAVE DISK' button and than the 'BROWSE' button.
Choose the appropiate drive and directory in which you put the xxx.INF, than click 'OPEN' and 'OK'. A list with all driver supported monitors will appear. Select your monitor Asus MW221U and double click 'NEXT'. Click 'FINISH' button and than the 'CLOSE' button. Now the driver file for your monitor MW221U is installed. Search and consult the Readme file for additional installation drivers instructions for your MW221U.
If during installation in Windows, you will be prompted with a message warning that the driver software for MW221U has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Asus, and safe to use. Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer.
However, it is recommended that you use this official driver provided by Asus for MW221U. Available 1 Drivers.